Energy performance certificate (EPC)
Certificate contents
Share this certificate
7, Hen Durnpike
Tregarth
BANGOR
LL57 4NN
19 March 2024
8774-7127-2940-7110-8922
- Property type
- Mid-terrace house
- Total floor area
- 76 square metres
Rules on letting this property
You may not be able to let this property
This property has an energy rating of F. It cannot be let, unless an exemption has been registered. You can read guidance for landlords on the regulations and exemptions.
Properties can be let if they have an energy rating from A to E. You could make changes to improve this property’s energy rating.
Breakdown of property’s energy performance
Features in this property
Features get a rating from very good to very poor, based on how energy efficient they are. Ratings are not based on how well features work or their condition.
Assumed ratings are based on the property’s age and type. They are used for features the assessor could not inspect.
Feature | Description | Rating |
---|---|---|
Wall | Granite or whinstone, as built, no insulation (assumed) | Very poor |
Wall | Cavity wall, as built, no insulation (assumed) | Poor |
Wall | Solid brick, as built, partial insulation (assumed) | Average |
Roof | Pitched, no insulation (assumed) | Very poor |
Roof | Flat, limited insulation (assumed) | Very poor |
Roof | Roof room(s), insulated (assumed) | Good |
Window | Fully double glazed | Average |
Main heating | Boiler and radiators, wood logs | Average |
Main heating control | TRVs and bypass | Average |
Hot water | Electric immersion, standard tariff | Very poor |
Lighting | Low energy lighting in 33% of fixed outlets | Average |
Floor | Solid, no insulation (assumed) | N/A |
Secondary heating | Room heaters, electric | N/A |
Low and zero carbon energy sources
Low and zero carbon energy sources release very little or no CO2. Installing these sources may help reduce energy bills as well as cutting carbon emissions. The following low or zero carbon energy sources are installed in this property:
- Biomass main heating
Primary energy use
The primary energy use for this property per year is 429 kilowatt hours per square metre (kWh/m2).
About primary energy use
Primary energy use is a measure of the energy required for lighting, heating and hot water in a property. The calculation includes:
- the efficiency of the property’s heating system
- power station efficiency for electricity
- the energy used to produce the fuel and deliver it to the property
Additional information
Additional information about this property:
- Cavity fill is recommended
- Stone walls present, not insulated
- Dwelling has access issues for cavity wall insulation
- Dwelling may be exposed to wind-driven rain
How this affects your energy bills
An average household would need to spend £1,485 per year on heating, hot water and lighting in this property. These costs usually make up the majority of your energy bills.
You could save £574 per year if you complete the suggested steps for improving this property’s energy rating.
This is based on average costs in 2014 when this EPC was created. People living at the property may use different amounts of energy for heating, hot water and lighting.
Heating this property
Estimated energy needed in this property is:
- 12,685 kWh per year for heating
- 2,782 kWh per year for hot water
Impact on the environment
This property’s environmental impact rating is C. It has the potential to be A.
Properties get a rating from A (best) to G (worst) on how much carbon dioxide (CO2) they produce each year.
Carbon emissions
- An average household produces
- 6 tonnes of CO2
- This property produces
- 2.6 tonnes of CO2
- This property’s potential production
- 0.2 tonnes of CO2
You could improve this property’s CO2 emissions by making the suggested changes. This will help to protect the environment.
These ratings are based on assumptions about average occupancy and energy use. People living at the property may use different amounts of energy.
Changes you could make
Do I need to follow these steps in order?
Yes. Each step builds on the one before it so you can save the most energy.
For example, it’s more energy efficient to insulate your home before you buy a new boiler. A well insulated home will lose less heat so you do not have to run your boiler as often.
Step 1: Flat roof or sloping ceiling insulation
- Typical installation cost
- £850 - £1,500
- Typical yearly saving
- £151
Step 2: Cavity wall insulation
- Typical installation cost
- £500 - £1,500
- Typical yearly saving
- £62
Step 3: Internal or external wall insulation
- Typical installation cost
- £4,000 - £14,000
- Typical yearly saving
- £72
Step 4: Floor insulation
- Typical installation cost
- £800 - £1,200
- Typical yearly saving
- £75
Step 5: Hot water cylinder insulation
Increase hot water cylinder insulation
- Typical installation cost
- £15 - £30
- Typical yearly saving
- £76
Step 6: Low energy lighting
- Typical installation cost
- £40
- Typical yearly saving
- £23
Step 7: Solar water heating
- Typical installation cost
- £4,000 - £6,000
- Typical yearly saving
- £117
Step 8: Solar photovoltaic panels, 2.5 kWp
- Typical installation cost
- £9,000 - £14,000
- Typical yearly saving
- £243
Step 9: Wind turbine
- Typical installation cost
- £1,500 - £4,000
- Typical yearly saving
- £86
Help paying for energy improvements
You might be able to get a grant from the Boiler Upgrade Scheme. This will help you buy a more efficient, low carbon heating system for this property.
More ways to save energy
Who to contact about this certificate
Contacting the assessor
If you’re unhappy about your property’s energy assessment or certificate, you can complain to the assessor who created it.
- Assessor’s name
- John Hearn
- Telephone
- 01492 573824
- jl.hearn@virgin.net
Contacting the accreditation scheme
If you’re still unhappy after contacting the assessor, you should contact the assessor’s accreditation scheme.
- Accreditation scheme
- NHER
- Assessor’s ID
- SAVA001177
- Telephone
- 01455 883 250
About this assessment
- Assessor’s declaration
- No related party
- Date of assessment
- 20 March 2014
- Date of certificate
- 20 March 2014
- Type of assessment
-
Show information about the RdSAP
RdSAP (Reduced data Standard Assessment Procedure) is a method used to assess and compare the energy and environmental performance of properties in the UK. It uses a site visit and survey of the property to calculate energy performance.
This type of assessment can be carried out on properties built before 1 April 2008 in England and Wales, and 30 September 2008 in Northern Ireland. It can also be used for newer properties, as long as they have a previous SAP assessment, which uses detailed information about the property’s construction to calculate energy performance.
Other certificates for this property
If you are aware of previous certificates for this property and they are not listed here, please contact us at dluhc.digital-services@levellingup.gov.uk or call our helpdesk on 020 3829 0748 (Monday to Friday, 9am to 5pm).
- Certificate number
- 9727-2817-7904-9108-3871
- Valid until
- 3 October 2028